Table of Contents
Advertisement
Hardware options installation
This chapter provides detailed instructions on how to install hardware options.
For more information on supported options, see the product QuickSpecs on the HPE ProLiant DL385 Gen10 Server
website at:
https://www.hpe.com/servers/dl385-gen10
To view the warranty for your server and supported options, see Warranty information.
Introduction
Install any hardware options before initializing the server. If multiple options are being installed, read the installation
instructions for all the hardware options to identify similar steps and streamline the installation process.
WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the internal system
components to cool before touching them.
CAUTION: To prevent damage to electrical components, properly ground the server before beginning any
installation procedure. Improper grounding can cause electrostatic discharge.
Installing the bezel and bezel lock
Hardware options installation
60
Advertisement
Table of Contents
