Table of Contents
Advertisement
Accessories
11.4 DC link adapter
3. Break out the cutouts.
– The cutouts on the lower side of the housing must be broken out for all cable cross-
– The cutouts at the upper side of the housing may only be broken out for larger cable cross-
4. Using a socket wrench, size 10, connect the DC link adapter connecting cables to the terminal
studs using M6 nuts. Tightening torque: 6 Nm (53 lbf in)
11.4.4.7
Technical data
Technical data
Table 11-9
Feature
Supply voltage
Continuous current-carrying capacity at 55 °C
Maximum ambient temperature
DC link connection
Tightening torque
DC link busbars
Fixing screw
Tightening torque
DC link adapter
Fixing screw
Tightening torque
Weight
11.4.5
DC link adapter 200 A
11.4.5.1
Description
Overview
The 200 A DC link adapter is used to directly supply the DC link voltage. It is preferably used for
supplying an individual component. For a direct infeed, each component is connected to the DC
link separately and the DC link busbars are not connected.
292
sections.
sections.
DC link adapter 72A (6SL3162-2BE00-0AA0)
Unit
Value
V
495 ... 720
A
72
°C
55
Threaded bolts M6
Nm (lbf in)
6 (53)
Torx-slotted screw TX 20
Nm (lbf in)
1.8 (15.9)
Torx-slotted screw TX 10
Nm (lbf in)
0.8 (7.1)
kg
0.10
Equipment Manual, 09/2023, A5E53307519B AA
Booksize power units
Advertisement
Table of Contents
