Siemens SINAMICS S220 Equipment Manual page 161

LEDs
RDY 1 RDY 2
for axis 1
for axis 2 1)
Red/Green Red/Green
(2 Hz) (2 Hz)
Orange/ Orange/
Green Green
or or
Orange/Red Orange/Red
(2 Hz) (2 Hz)
Also applies to Double Motor Modules
1)
Irrespective of the status of the LED "DC LINK"
2)
Booksize power units
Equipment Manual, 09/2023, A5E53307519B AA
DC LINK
– Firmware download is complete. The system waits
2)
for POWER ON.
– Component recognition via LED is activated by the
2)
commissioning tool (parameter p0124).
Remark:
The colors of the flashing LED depend on what sta‐
tus the LED had on activation (setting of parameter
p0124 to "1").
8.3 Motor Modules 3 ... 30 A and 2x3 ... 2x18 A
Description, cause
Motor Modules
Remedy
Carry out a POWER ON.
–
159