Technical specifications
7.2 General technical data series 6
Analyzer chamber O-
FKM
ring
Condensation trap at
PA6 (polyamide) PE
gas inlet
(polyethylene)
* Wall strengths of the components used for E21 all ≥ 1 mm
7.2
General technical data series 6
The general technical specifications apply to all analyzer versions unless they are not defined
otherwise in the technical specifications of the analyzer versions.
The technical specifications listed in this document are an excerpt that includes all safety-
related data. The complete technical specifications can be found in the respective operating
instructions of your analyzer.
Enclosure
Position of use of the analyzer
Degree of protection
Electrical characteristics
EMC interference immunity
(with safety extra-low voltage (SELV) with
safe isolation)
Electrical safety
Auxiliary power supply
Climatic conditions
Permissible ambient temperature
•
During operation
– CALOMAT 6E, article no. 7MB252x-xGAxx
– All other analyzers
•
During transportation and storage
•
Pollution degree
Vibrations
•
During operation
•
During transportation and storage
Permissible ambient pressure
54
19" rack unit with
19" rack unit
hoses
with hoses
incl. with option‐
ONLY for order
al order option
option E21 *
E20
x
Front panel vertical
IP20 according to EN / IEC 60529
In accordance with standard requirements of NAMUR NE21 or EN / IEC 61326
In accordance with EN / IEC 61010-1,
overvoltage category III
100 V AC to 120 V AC, 50/60 Hz or
200 V AC to 240 V AC, 50/60 Hz
+5 to +55 °C
+5 to +45 °C
-20 °C to + 60 °C (-4 °F to +140 °F)
2 according to IEC 60664-1
None
Maximum vibration 5 m/s
700 to 1200 hPa absolute
Compact Operating Instructions, 01/2024, A5E45779144002-AB
19" rack unit
with pipes
x
2
Series 6 and ULTRAMAT 23
Bench-top unit
with hoses
(not for Ex appli‐
cations)
x
x