Interfaces And Connections; Drive-Cliq Cabinet Bushing For Rj45 Plug - Siemens SINAMICS S220 Equipment Manual

Accessories
11.3 DRIVE-CLiQ cabinet bushing
Table 11-3
Description
RJ45 socket
M12 plug/socket
Inside: Plug with male thread
Outside: Socket with female thread
11.3.2

Interfaces and connections

11.3.2.1

DRIVE-CLiQ cabinet bushing for RJ45 plug

Description
5
①
②
③
④
⑤
Figure Pin assignment
②
⑤
1) To ensure that the complete outside of the cabinet bushing, including the DRIVE-CLiQ interface, has
degree of protection IP54, a DRIVE-CLiQ cable must be used, which has at least degree of protection
IP54.
272
DRIVE-CLiQ cabinet bushings
Protective cap, Yamaichi, Article No.: Y-ConAS-24-S
DRIVE-CLiQ interface outside
Fastening holes
Flange-type seal to ensure degree of protection IP54 on the outside of the control cabinet
DRIVE-CLiQ interface on the inside
DRIVE-CLiQ interface outside
DRIVE-CLiQ interface on the in‐
side
Degree of protection according to
IEC 60529
IP54 outside the control cabinet
IP20 inside the control cabinet
IP67 outside the control cabinet
IP67 inside the control cabinet
1
2
3
4
Technical data
To connect DRIVE-CLiQ signal cables MOTION‑CONNECT with
degree of protection IP54
To connect DRIVE-CLiQ signal cables MOTION-CONNECT with
degree of protection IP20
Equipment Manual, 09/2023, A5E53307519B AA
Article number
6SL3066-2DA00-0AA0
6FX2003-0DT67
1)
Booksize power units