Table of Contents
Advertisement
Procedure
Proceed as follows to connect the cables to the DC link adapter and to connect the cable shields:
1. Fix the first core of the cable to the mounting rail using a cable clamp.
2. Route the cable end through an appropriate hose clamp.
3. Attach the hose clamp to the shield support of the DC link adapter and slide the end of the
cable into the DCN connection of the DC link adapter (= lower connection).
Booksize power units
Equipment Manual, 09/2023, A5E53307519B AA
Accessories
11.4 DC link adapter
307
Advertisement
Table of Contents
