Table of Contents
Advertisement
Motor Modules
8.5 Motor Modules 85 A, 132 A and 200 A
8.5.1.2
Interfaces (lower side)
Overview diagram
①
②
③
④
Figure 8-56
8.5.1.3
X21 EP terminals/temperature sensor
Overview
A temperature sensor and the signal cable for the enable pulses (EP) function are connected at
interface X21.
The plug-in terminals are included in the Terminal Kit of the Motor Module.
212
X1: Motor connection block
X11: Connecting the holding brake
X12: Fan connection
Screw for the protective conductor connection of the Motor Module
Interface overview, Motor Modules 85 A, 132 A and 200 A (lower side)
Booksize power units
Equipment Manual, 09/2023, A5E53307519B AA
Advertisement
Table of Contents
