Siemens SINAMICS S220 Equipment Manual page 40

System overview
3.3 System data
Table 3-6 Climatic environmental conditions
Usage phase
Long-term storage
Transport
Operation
Table 3-7 Mechanical environmental conditions
Usage phase
Long-term storage
Transport
Operation
Vibration test in operation
Shock test in operation
Product packaging (storage packaging) is single unit packaging for storage - and does not satisfy the requirements for
1)
transport. As a consequence, product packaging is therefore not suitable for shipping.
Transport packaging is either packaging that is directly suitable for transport, or secondary packaging which, together with
2)
the product packaging, satisfies the requirements for transport.
38
Description
Class 1K4 according to IEC 60721-3-1:1997, in product packaging
Temperature: -25 ... +55 °C
Class 2K4 according to IEC 60721-3-2:1997, in transport packaging
Temperature: -40 ... +70 °C
Class 3K3 according to IEC 60721-3-3:2002 with increased ruggedness with respect to
relative humidity
Temperature: -10 ... +40 °C without reduction of the output current
> 40 ... +55 °C with reduction of the output current by 2.67 % per °C
Relative humidity: 5 ... 95 % no condensation (better than Class 3K3)
Oil mist, salt mist, ice formation, condensation, dripping water, spraying water, splash‐
ing water and water jets are not permitted
Description
Class 1M2 according to IEC 60721-3-1:1997, in product packaging
Class 2M3 according to IEC 60721-3-2:1997, in transport packaging
Class 3M1 according to IEC 60721-3-3:2002
According to IEC 60068-2-6 test Fc (sinusoidal)
• 10 ... 57 Hz: 0.075 mm deflection amplitude
• 57 ... 150 Hz: 1 g acceleration amplitude
• 10 frequency cycles per axis
According to IEC 60068-2-27 test Ea (half-sine)
• 5 g peak acceleration
• 30 ms duration
• 3 shocks in all three axes in both directions
1)
2)
1)
2)
Booksize power units
Equipment Manual, 09/2023, A5E53307519B AA