Siemens SINAMICS S220 Equipment Manual page 21

Note
It cannot be guaranteed that EMC emission limits are complied with if the products are
connected to an isolated line supply grounded through a high ohmic connection or a line supply
with grounded line conductor.
• Draw-up an EMC plan to comply with the EMC requirements of the intended application.
Description
The products described in this document, together with software, accessories and options, form
an electric drive to supply low-voltage three-phase motors.
The products are professional devices for stationary indoor use in industrial, light-industrial
and commercial applications and are intended for supply from a non-public (industrial)
low-voltage network. The products are not intended for use in residential areas and are not
intended for supply from a public low-voltage network.
The products must be correctly transported and stored and must be installed, commissioned,
and maintained by professionals who have adequate knowledge to implement the safety,
security, and EMC measures in accordance with the specifications described in this manual
and recognized state-of-the-art engineering practice.
You may only use the products when the following requirements are complied with:
• All regulations and directives that are applicable at the place of final use, especially with
regard to electrical safety, functional safety and electromagnetic compatibility (EMC).
• All instructions, notes, technical specifications, and safety and security information
contained in this document and other supporting documentation.
The products are part of a machine or system. They must guarantee the safety of persons
and material assets as well as electromagnetic compatibility by applying suitable measures
when designing the system.
Perform a risk assessment of the entire application, including third-party products and
implement adequate safety and security measures before using the product.
Products without protective enclosure (IP00 or IP20) are intended for installation in control
panels or control cabinets that provide the required level of protection.
Any other use that is not expressly permitted can result in malfunctions and unpredictable
hazards.
Booksize power units
Equipment Manual, 09/2023, A5E53307519B AA
Introduction
1.5 Important product information
19