Graphics And Video Interface - Infineon TRAVEO T2G Cluster 4M Lite Kit User Manual

TRAVEO™ T2G Cluster 4M Lite Kit user guide
KIT_T2G_C-2D-4M_LITE
Hardware blocks
3.7

Graphics and video interface

This kit supports different video-compatible interfaces that can be accessed via specific connectors and
supported by compatible components such as displays, camera, and adapter boards.
Figure 26 shows the different video and graphic interfaces available in this kit.
Figure 26 Video interfaces
3.7.1 EZ-USB™ FX3 interface
This kit supports the FX3 video interface via a Type-C connector to stream the graphics output on the screen. It is
a plug-and-play device as EZ-USB™ FX3 comes with the necessary firmware preloaded. The RGB display signals
coming from the CYT3DL device are converted into USB 3.2 packets by FX3 and streamed to a PC. The PC detects
the FX3 as a camera and thus any media player application (such as an MPC Player or VLC) can display the
graphics streamed by it.
For streaming, you can use any media player (refer to
stream graphics output).
Figure 27 shows the connection of the Type-C cable required to stream FX3 into PC; also, ensure that jumper X502
is not shorted in this kit.
User guide
Section 2.3 for configuring the media player and FX3 to
29 002-39200 Rev. **
2023-12-11