Page 1
U s e r ’ s M a n u a l , V 1 . 1 , F e b r u a r y 2 0 1 2 T r i B o a r d T C 1 7 8 4 H a r d w a r e M a n u a l B G A 2 9 2 V 1 .
Page 2
Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life.
Page 3
U s e r ’ s M a n u a l , V 1 . 1 , F e b r u a r y 2 0 1 2 T r i B o a r d T C 1 7 8 4 H a r d w a r e M a n u a l B G A 2 9 2 V 1 .
Page 4
TriBoard TC1784 Hardware Manual BGA292 V1.1 Revision History: 2012-02 V 1.1 Previous Version: Page Subjects (major changes since last revision) change to hardware V1.1, remove TC1387 We Listen to Your Comments Any information within this document that you feel is wrong, unclear or missing at all? Your feedback will help us to continuously improve the quality of this document.
TriBoard TC1784 Hardware Manual Introduction Introduction We congratulate you on your purchase of the TriCore Evaluation Board. This kit is a versatile tool, providing quick access to the capabilities of TriCore's powerful architecture. Applications can be developed easily. The Evaluation Board is equipped with a variety of memories and peripherals for connection to the environment.
TriBoard TC1784 Hardware Manual TriBoard Features TriBoard Features The TriBoard TC1784 is soldered with a the device TC1784 in the BGA292 package. Summary of Features – Infineon’s TC1784 Controller in BGA292 Package – FlexRay Transceivers – Safety device (optional) – High Speed CAN Transceivers –...
Page 14
TriBoard TC1784 Hardware Manual TriBoard Features Zero Ohm Bridges Zero Ohm resistors give the flexibility to configure the systems functionality User’s Manual V 1.1, 2012-02...
TriBoard TC1784 Hardware Manual TriBoard Information TriBoard Information Power Supply The Board has to be connected to a +5,5V to +50V (+40V) DC power supply. The TriBoard generates internally +3.3V, +VDD and +5V. The power consumption is not specified yet but a supply with 6V and 500mA should be sufficient. The pinout for the...
TriBoard TC1784 Hardware Manual TriBoard Information The crystal oscillator and the oscillator circuit use the socket XT301. It's possible to apply a 14pol DIP oscillator package or an 8pol DIP oscillator package. OSCILLATOR DIP14 OSCILLATOR DIP8 External Clock Input Figure 3-1...
TriBoard TC1784 Hardware Manual TriBoard Information FlexRay The board has 2 SUB-D connectors for FlexRay Communication with up to 10 Mbit/s. For the pinout of the plugs see Figure 7-5. The controller have an E-Ray modul and the transceiver are connected directly to the...
TriBoard TC1784 Hardware Manual TriBoard Information 3.10 Toggle LED’s Port 5 pin 0 up to pin 7 are connected to single LED’s (D501... D508) and can be controlled by Software. This status LED’s are low active. 3.11 Debug System 3.11.1 OCDS1 The OCDS1 signals are connected to the IDC16 plug (X401).
TriBoard TC1784 Hardware Manual TriBoard Configuration TriBoard Configuration HW Boot Configuration HIGH Figure 4-1 HW Configuration TC1784 DIP-Switch The picture above shows the definition of the boot HW configuration switch. The meaning of the switches will be described in the following table (Table 4-1).
Page 22
TriBoard TC1784 Hardware Manual TriBoard Configuration Table 4-1 User Startup Modes for TC1784 Note: The shadowed line indicates the default setting. Note: ’x’ represents the don’t care state. Note: 1 to 8 are the Dip Switch numbers HWCFG[7...0] Type of Boot TC1784...
TriBoard TC1784 Hardware Manual TriBoard Configuration Assembly Options Table 4-2 General optional resistors Component Description R205 XTAL Rserial (default: assembled) R206 XTAL Rparallel (default: not assembled) R423 Connect /BRKOUT with MiniWiggler (default: not assembled) R424 Connect /BRKOUT with OCDS1 connector (default: not assembled)
Page 24
TriBoard TC1784 Hardware Manual TriBoard Configuration Note: All resistors are red marked in the following figures CB406 R407 P401 R402 R403 R404 X704 X701 U402 R406 CB401 R405 C401 D403 D402 X403 R401 R518 X401 R434 R515 R516 R517 X402...
Page 25
TriBoard TC1784 Hardware Manual TriBoard Configuration Table 4-3 Resistors for peripherals Component Description R333 Connect P3.12 with RXD of CAN0 transceiver (default: assembled) R339 Connect P3.14 with RXD of CAN1 transceiver (default: assembled) R353 Connect P3.5 (SLSO00) with /CS of Eeprom (default: assembled) R305 Connect P1.4 with EN of Flexray channel A (default: not assembled)
Page 26
TriBoard TC1784 Hardware Manual TriBoard Configuration Note: All resistors are red marked in the following figures CB406 R407 P401 R402 R403 R404 X704 X701 U402 R406 CB401 R405 C401 D403 D402 X403 R401 R518 X401 R434 R515 R516 R517 X402...
Page 27
TriBoard TC1784 Hardware Manual TriBoard Configuration Table 4-4 Resistors for safety device Component Description R239/R240 Voltage divider to adapt VDDP to VAREF of safety device (default: assembled) R252 Connect P3.6 (SLSO01) with /CS of safety device (default: assembled) R253 Connect P3.2 (SSC0) to SCLK of safety device (default: assembled) R254 Connect P2.11 (SSC1) to SCLK of safety device (default: not...
Page 28
TriBoard TC1784 Hardware Manual TriBoard Configuration Table 4-5 Resistors for memories Component Description R103 Connect /CS1 to 16-bit SRAMs (default: assembled) R104 Connect /CS0 to 16-bit SRAMs (default: not assembled) R112 Connect /CS0 to 16-bit TSOP Flash (default: assembled) R113...
TriBoard TC1784 Hardware Manual TriBoard Software TriBoard Software Requirements To install the software from your TriBoard CD you need a PC with Windows 2000, Windows XP, Windows Vista, or Windows 7 Software Overview The CD does not contain any tool. For the availablity for Demo Versions of the different Tools, please contact the toolvendor directly (e.g.
TriBoard TC1784 Hardware Manual Signal Description Signal Description For more information about the signals please see the user manual from TC1784 and/or the schematics of the board. Table 6-1 Power Signals Short Name Description VCC_IN Supply Input (5,5V...50V(40V)) Input voltage of power supply device...
Page 34
TriBoard TC1784 Hardware Manual Signal Description Table 6-3 Interrupt Signals Short Name Description /NMI (ESR1) Non Maskable Interrupt /RESET_CIC Reset safety device Table 6-4 Clock Signals Short Name Description XTAL1 Crystal Oscillator Input XTAL2 Crystal Oscillator Output XTAL1_CIC Crystal Oscillator Input safety device...
TriBoard TC1784 Hardware Manual Connector Pin Assignment Connector Pin Assignment The TriBoard will be shipped with four male (plug) connectors on top layer and four female (socket) connectors on bottom layer. The default connectors are 80-pol. Board to Board connectors from Samtec: http://www.samtec.com...
TriBoard TC1784 Hardware Manual Schematic and Layout Schematic and Layout Schematic 8.1.1 Changes on schematic version V1.1 • Change Power Supply to TLE7368-3E User’s Manual V 1.1, 2012-02...
Page 44
TriBoard TC1784 Hardware Manual Schematic and Layout Figure 8-1 Schematic - Project User’s Manual V 1.1, 2012-02...
Page 45
TriBoard TC1784 Hardware Manual Schematic and Layout Figure 8-2 Schematic - External Memories User’s Manual V 1.1, 2012-02...
Page 46
TriBoard TC1784 Hardware Manual Schematic and Layout Figure 8-3 Schematic - Config, Clock and CIC61508 User’s Manual V 1.1, 2012-02...
Page 47
TriBoard TC1784 Hardware Manual Schematic and Layout Figure 8-4 Schematic - Flexray, CAN and Eeprom User’s Manual V 1.1, 2012-02...
Page 48
TriBoard TC1784 Hardware Manual Schematic and Layout Figure 8-5 Schematic - MiniWiggler, DAP and ETK User’s Manual V 1.1, 2012-02...
Page 49
TriBoard TC1784 Hardware Manual Schematic and Layout Figure 8-6 Schematic - GPTA, MSC, MLI and ADC User’s Manual V 1.1, 2012-02...
Page 50
TriBoard TC1784 Hardware Manual Schematic and Layout Figure 8-7 Schematic - Power Supply User’s Manual V 1.1, 2012-02...
Page 51
TriBoard TC1784 Hardware Manual Schematic and Layout Figure 8-8 Schematic - Connectors (Plug) User’s Manual V 1.1, 2012-02...
TriBoard TC1784 Hardware Manual Schematic and Layout Layout with Dimensioning The following dimensions should be used for development of extension boards. Note: these are the pictures from the TriBoard TC10GP. Connectors X801...X804 are on the same place. Figure 8-12 Dimensioning (mil) User’s Manual...
Page 56
TriBoard TC1784 Hardware Manual Schematic and Layout Figure 8-13 Dimensioning (mm) User’s Manual 8-14 V 1.1, 2012-02...
This section lists a number of keywords which refer to specific details of the TriBoard TC1784 in terms of its architecture, its functional units or functions. This helps to quickly find the answer to specific questions about the TriBoard TC1784. HWCFG 4-1...
Page 58
TriBoard TC1784 Hardware Manual Keyword Index Peripheral Signals 6-2 Power connector pinout 7-4 Power Signals 6-1 power supply 3-1 reset 3-1 Reset Signals 6-1 Resistors for memories 4-8 Resistors for peripherals 4-5 Resistors for safety device 4-7 Robinson Nugent 7-1...