Power Supply Block - Infineon TRAVEO T2G Cluster 4M Lite Kit User Manual

TRAVEO™ T2G Cluster 4M Lite Kit user guide
KIT_T2G_C-2D-4M_LITE
Hardware blocks
Figure 18 EZ-USB™ FX3 location
Note: Refer to Section
3.4

Power supply block

This kit supports the on-board PMIC module and LDOs to generate the power supplies to run the TRAVEO™ T2G
CYT3DL MCU and other peripherals. The PMIC module takes input from the 12-V adapter or 5 V from the USB
connectors to generate voltages based on the requirements and configurations for this kit. The PMIC output rails
can drive the other peripherals available on the kit.
Figure 19 illustrates the kit power supply block diagram.
User guide
3.7.1.
22 002-39200 Rev. **
2023-12-11