TRAVEO™ T2G Cluster 4M Lite Kit user guide
KIT_T2G_C-2D-4M_LITE
System and functional description
3. Next, go to Setup > Serial port > Speed > and select "115200" and press the "New setting" button.
Figure 8
Selecting baud-rate of UART in terminal
4. Now, press the reset button (S200) on the kit and the message logs (silicon details and test results of
peripherals) pop up on the screen, as shown in the following screenshot.
Figure 9
Silicon details and test logs
User guide
15
002-39200 Rev. **
2023-12-11