Infineon TRAVEO T2G Cluster 4M Lite Kit User Manual page 42

TRAVEO™ T2G Cluster 4M Lite Kit user guide
KIT_T2G_C-2D-4M_LITE
Hardware blocks
Figure 36 Connecting WM8960 Audio HAT
3.12.3 Ethernet board
This kit does not have on-board ethernet PHY but you can use the external ethernet PHY boards by connecting
them to the PMOD connector (X801) on the board. The following sections provide details about the boards which
are supported with this kit for ethernet.
3.12.3.1 DP83848 Ethernet board
The DP83848 ethernet board is an accessory board that includes an onboard Ethernet Physical Layer Transceiver
DP83848, RJ45 connector, and control interface.
3.12.3.2 LAN8720 Ethernet board
The LAN8720 ethernet board supports RMII interface with a 10/100 ethernet transceiver LAN8720.
Figure 37 shows how to connect the DP83848 and LAN 8720 ethernet board with this kit.
User guide 42 002-39200 Rev. **
2023-12-11