Ez-Usb™ Fx3 - Infineon TRAVEO T2G Cluster 4M Lite Kit User Manual

TRAVEO™ T2G Cluster 4M Lite Kit user guide
KIT_T2G_C-2D-4M_LITE
Hardware blocks
Figure 17 KitProg3 location
3.3 EZ-USB™ FX3
Infineon's EZ-USB™ FX3 is the industry's most versatile USB peripheral controller, which can add a USB 5-Gbps
connectivity to any system. The second-generation general programmable interface (GPIF II) of EZ-USB™ FX3 can
connect to a processor, an image sensor, an FPGA, or an ASIC. Users can program the GPIF to behave like a FIFO,
an asynchronous SRAM, an address/data multiplexed interface, a CompactFlash, or a proprietary interface.
In this kit, you can connect the EZ-USB™ FX3 that has a Type-C connector directly to the laptop/PC USB port (note
that EZ-USB™ FX3 only supports the USB 3.0 port) for streaming graphics output. You do not need any RGB display
to view the graphics output.
Figure 18 shows the location of the EZ-USB™ FX3 in this kit.
User guide 21 002-39200 Rev. **
2023-12-11