Safety Precautions - Infineon TRAVEO T2G Cluster 4M Lite Kit User Manual

TRAVEO™ T2G Cluster 4M Lite Kit user guide
KIT_T2G_C-2D-4M_LITE

Safety precautions

Safety precautions
Note: Please note the following warnings regarding the hazards associated with development system
Table 1 Safety precautions
Warning: The evaluation or reference board contains DC bus capacitors which take time
to discharge after removal of the main supply. Before working on the drive system, wait five
minutes for capacitors to discharge to safe voltage levels. Failure to do so may result in
personal injury or death. Darkened display LEDs are not an indication that capacitors have
discharged to safe voltage levels.
Caution: Only personnel familiar with the drive, power electronics and associated
machinery should plan, install, commission and subsequently service the system. Failure
to comply may result in personal injury and/or equipment damage.
Caution: The evaluation or reference board contains parts and assemblies sensitive to
electrostatic discharge (ESD). Electrostatic control precautions are required when
installing, testing, servicing or repairing the assembly. Component damage may result if
ESD control procedures are not followed. If you are not familiar with electrostatic control
procedures, refer to the applicable ESD protection handbooks and guidelines.
Caution: The evaluation or reference board is shipped with packing materials that need to
be removed prior to installation. Failure to remove all packing materials that are
unnecessary for system installation may result in overheating or abnormal operating
conditions.
User guide 3 002-39200 Rev. **
2023-12-11