Infineon TRAVEO T2G Cluster 4M Lite Kit User Manual page 12

TRAVEO™ T2G Cluster 4M Lite Kit user guide
KIT_T2G_C-2D-4M_LITE
System and functional description
Figure 4 shows the connection of the 12-V power adapter and jumper configuration.
Figure 4 Connecting 12-V DC power adapter to X100
2.2.3 USB Micro-B
Use the same jumper settings as mentioned in the USB Type-C section. After configuring the jumper settings,
connect the USB Micro-B cable between the USB Micro-B connector X400 and the USB port of the PC.
Observe that the VBUS LED (5 V) and power LEDs (3.3 V, 1.2 V, and 1.1 V) start glowing. The KitProg3 mode status
LED (D401) also glows because KitProg3 gets powered-up with this Micro-B cable.
Figure 5 shows the connection of the USB Micro-B cable and jumper configuration.
User guide 12 002-39200 Rev. **
2023-12-11