Infineon TRAVEO T2G Cluster 4M Lite Kit User Manual page 40

TRAVEO™ T2G Cluster 4M Lite Kit user guide
KIT_T2G_C-2D-4M_LITE
Hardware blocks
Figure 34 Different shields supported by TRAVEO™ T2G Cluster 4M Lite kit
3.12.1 CY8CKIT-026 CAN and LIN Shield Kit
This kit supports the CY8CKIT-026 CAN and LIN Shield kit, which is an Arduino-compatible shield board used with
several Infineon kits such as the CY8CKIT-042 PSoC™ 4 Pioneer Kit/CY8CKIT-044 PSoC™ 4 M-Series Pioneer Kit or
the FM4-176L-S6E2GM - Arm® Cortex®-M4 MCU Pioneer Kit. It enables you to evaluate the Controller Area Network
(CAN) and Local Interconnect Network (LIN) slave communication capabilities of CYT3DL device.
By default, the TRAVEO™ T2G Cluster 4M Lite kit does not come with CAN and LIN transceivers but by using this
shield, you can use those communication protocols in the TRAVEO™ T2G Cluster 4M Lite kit.
Figure 35 shows how to connect the CAN and LIN shield with this kit.
User guide 40 002-39200 Rev. **
2023-12-11