Hazards And Safety Provisions During Servicing - Angelo Po 1S1PI1E Manual

SAFETY

HAZARDS AND SAFETY PROVISIONS DURING SERVICING

During servicing, watch out for the following hazards and provide for the countermeasures indi-
cated below:
► Source of hazard: appliance mechanics
Hazard
Risk of cutting due
to sharp edges
► Source of hazard: risks associated with the environment in which the appliance is used
Hazard
Presence of satu-
rated steam
NOTE: Only applies to electrical appliances .
► Source of hazard: electric power
Where or in which situations
Hazard
does the hazard occur?
Risk of electric • Under protective panels
shock caused by
• Under the control panel
live components
• Under protection covers
3413990_ut_GB
Where or in which situations
does the hazard occur?
When handling sheet-metal
parts
Where or in which situations
does the hazard occur?
Condensation and dripping
on electrical parts
Countermeasures
• Pay special care during
this activity
• Wear personal protective
equipment in accordance
with safety regulations
Countermeasures
• Periodic servicing of the
appliance wiring diagram,
to be carried out only by
expert technicians of an
authorised customer ser-
vice
Countermeasures
• Operations to the electric
system may be carried out
by authorised and qualified
staff only, in accordance
with the relevant applica-
ble laws .
• Specialist procedure
• Comply with the correct in-
stallation requirements as
per section "Installing the
appliance" of the installa-
tion manual .
• Disable the power supply
before removing the pro-
tections
ENGLISH
Safety
device
None
Safety
device
None
Safety
device
• P r o t e c t i o n
panels
• S y s t e m
s w i t c h - d i s -
connector
9