Treatment While Standing; Patient-Specific Chair Programs - Dentsply Sirona Treatment Center Axano Pure Instructions For Use Manual

Dentsply Sirona
Instructions for Use Treatment Center Axano Pure
68 29 514 D3685
D3685.201.02.01.02 2023-12
4.4.10

Treatment while standing

For treatment while standing, a second level can be activated for the
chair programs 1 to 4.
ü The start dialog is displayed.
1. Tap on the Treatment while standing" key.
Ä If the key is marked orange, the chair programs 1 to 4 are
switched to the second level.
2. Tap one of the program keys 1 to 4 briefly (<2 s).
Ä The treatment chair moves to the saved position for treatment
while standing.
3. To move back to the chair positions for treatment while sitting, the
Treatment while standing function must first be deactivated. Tap
again on the Treatment while standing key.
Ä If the key has a white background, the chair programs 1 to 4 are
switched back to the first level. When the program keys 1 to 4
are tapped, the chair moves to the saved positions for treatment
while sitting.
The positions preset at the factory can be reprogrammed individually for
each user profile by pressing and holding the program keys 1 to 4
(> 2 s), see "Configuring chair programs and shock positioning" [→ 76].
As long as the Treatment while standing function is activated, the chair
moves to the positions for treatment while standing when the program
keys 1 and 2 are pressed on the assistant element as well.
4.4.11

Patient-specific chair programs

With Sidexis 4, users can save the patient-specific chair positions for
each patient using the program keys (S, 0, 1, 2, and if applicable 3, 4).
The next time the patient is logged in, the chair positions are available
again. For this, Sidexis 4 and Sivision View must be installed on the PC.
For details, please refer to the "Sivision View" user manual REF
68 0 0 1 43.
Activate and retrieve patient-specific chair programs
ü The patient-specific chair programs function is activated in
Sidexis 4.
ü A patient is registered in Sidexis 4. The patient name is displayed in
the header of the Smart Touch.
ü The start dialog is displayed.
1. Tap on the Patient-specific chair programs key briefly (< 2 s).
Ä If the key is orange, the Patient-specific chair programs function
is activated.
4 Operation
4.4 Patient chair
77