Table of Contents
Advertisement
4 Operation
4.5 Dentist element
110
4.5.14.1.2
Calibrating the burr drive
WARNING
Calibration must be performed each time you start treatment and
each time you change or lubricate the contra-angle handpieces.
Recalibration is not necessary when a file is changed.
The contra-angle handpiece is automatically checked during calibration.
This includes a measurement of motor current at different speeds to
assess the properties of the system.
WARNING
Use only Dentsply Sirona instruments to guarantee correct
calibration.
ü The endodontics dialog is displayed on the Smart Touch.
1. Attach the contra-angle handpiece that you would like to use for the
treatment to the electric motor.
2. Insert a file in the contra-angle handpiece. This ensures that the file
is taken into account in the measurement.
3. Tap on the Cal key.
or
➢ Press the left button of the foot control.
Ä The button flashes orange. During calibration, increasing
speeds are set on the motor. When the bur drive is calibrated,
the key is permanently marked orange. Calibration is then
finished.
4.5.14.1.3
Select favorite file system
ü The endodontics dialog is displayed on the Smart Touch.
1. Tap on the Select file system key.
Ä A list of favorite file systems is displayed.
2. Select one of the file systems listed. If the desired system is not on
the list, it has not yet been marked as a favorite, see "Managing file
systems" [→ 121].
Ä After tapping on a file system, the list is hidden. The files of the
selected system are displayed in the endodontics dialog.
4.5.14.1.4
Selecting a file
ü The files of the selected file system are displayed in the
endodontics dialog.
➢ Select the desired file. Tap on the File selection keys or one of the
files displayed. Swipe left and right to display other files for the
selected file system.
Instructions for Use Treatment Center Axano Pure
D3685.201.02.01.02 2023-12
Dentsply Sirona
68 29 514 D3685
Advertisement
Table of Contents
