Configurating The Simulation Unit (Setup); Configuring The Treatment Center On The User Interface; Access The Setup Program - Dentsply Sirona Sim Multi Bench Operating Instructions Manual

4 Operation

4.7 Configurating the simulation unit (setup)

2
Setup
2
Setup
1 3
2
Setup
A/B
70
Configurating the simulation unit (setup)
4.7
Using the Setup settings, various functions of the simulation unit can be
individually configured. This means the simulation unit can be adapted
to the personal working methods of each user .
4.7.1

Configuring the treatment center on the user interface

4.7.1.1

Access the Setup program

ü All instruments are in their holders.
ü The required user profile is active.
➢ Press and hold the favorite key 2 / Setup (> 2 s).
Ä The Setup operating context opens. The first Time selection
context appears on the AE SIM display.
The Setup operating context contains several selection contexts. The
active focus flashes.
Press favorite key 2/Setup to select the next focus item or display the
next selection context.
Use favorite buttons 1 and 3 to make the necessary adjustments.
IMPORTANT
Storing settings in setup
If no key is pressed for > 25 s, the Setup dialog closes automatically.
All settings made are saved.
Pressing the Counterclockwise rotation/User profile button immediately
hides the Setup operating context.
IMPORTANT
Missing menus
Menus for functions not included with the simulation unit are not
displayed in setup
Operating Instructions Simulation Unit Sim Multi Bench
D3684.201.01.02.02 07.2019
Dentsply Sirona
66 82 384 D3684