Table of Contents
Advertisement
Dentsply Sirona
Instructions for Use Treatment Center Axano Pure
68 29 514 D3685
D3685.201.02.01.02 2023-12
4.4.3
Triggering an immediate movement stop
WARNING
You can stop the movement of the chair to a programmed position as
follows:
➢ Tap on a key for the patient chair on the Smart Touch, a key to tilt
the motorized headrest. or the Shock positioning fixed key.
➢ Press one of the patient chair keys on the control panel of the
assistant element.
➢ Press the standby switch on the user interface of the dentist
element.
➢ When all instruments are in place, press the pedal or the left or right
button of the foot control.
➢ With an instrument removed, press the pedal of the foot control.
➢ With the cursor control switched off, activate middle button or one of
the two swivel buttons on the foot control.
➢ With the cursor control switched on, move the cursor to any of the
keys relating to the patient chair.
➢ Activate one of the 4-way switches on the motorized headrest in
any direction. Exception: The upper 4-way switch up/down, see
note below.
Ä All movements of the treatment center are stopped immediately.
IMPORTANT
The function keys and switches for adjusting the headrest to the
height of the patient can be used during the program run. This does
not trigger a movement stop.
4 Operation
4.4 Patient chair
67
Advertisement
Table of Contents
