Maintenance; Network - Dentsply Sirona Treatment Center Axano Pure Instructions For Use Manual

4 Operation
4.16 Configuration of the treatment center (setup)
186
4.16.7

Maintenance

In the "Maintenance" area, relevant functions and settings are provided
for your service technician.
4.16.7.1

Network

Sivision
Indicates the connection status of the treatment center to Sivision View.
Device name
You can change the name of the treatment center displayed in the
practice network. The name must have at least 4 characters. In the
factory settings, the name consists of the product name and serial
number.
Reset the access rights
The first time an external application such as Sivision View on the
practice PC is connected to the treatment center, it must have been
granted access to the treatment center in a message window on the
Smart Touch. Resetting deletes authorizations that have been granted.
Access to the treatment center can then be granted to external
applications again or prohibited.
IP configuration, DNS configuration, NTP configuration and WLAN
configuration
Consult your data processing specialist for network configuration.
Network configuration is described in detail in the "Axano/ Axano Pure
installation instructions" REF 67 2 1 8 85.
When servicing, a direct connection to the treatment center can be
established via the WLAN configuration if the treatment center cannot
be accessed via the practice network. Access is available via the DS
service software.
Instructions for Use Treatment Center Axano Pure
D3685.201.02.01.02 2023-12
Dentsply Sirona
68 29 514 D3685