Dentsply Sirona Treatment Center Axano Pure Instructions For Use Manual page 180

4 Operation
4.16 Configuration of the treatment center (setup)
180
4.16.5.6.5 Suction hose cleaning
Automatic cuspidor flushing with suction hose cleaning
When the function is activated, chemical cuspidor cleaning is
automatically carried out after every suction hose cleaning.
Please note that the flushing time is 45 seconds in this case and cannot
be changed. This time is necessary to add the cleaning agent to the
water, apply it the drain line, and then flush with water.
Concentration of chemical cleaning agent
You can set how much cleaning agent should be added to the water for
chemical suction hose cleaning in increments. For details, please refer
to section "Conduct suction hose cleaning" [→ 233].
CAUTION
Note the concentration of cleaning agent
The quantity is dependent on the cleaning agent used and the type of
treatment. Please follow the manufacturer's instructions for the
cleaning agent.
4.16.5.6.6 Water supply
Instructions for Use Treatment Center Axano Pure
D3685.201.02.01.02 2023-12
Dentsply Sirona
68 29 514 D3685