Start Treatment - Dentsply Sirona X-SMART IQ Directions For Use Manual

Step by Step Instructions

6.7.5.2 Start Treatment

To adjust the torque and speed
parameters
To set auto reverse
function.
See 6.6.1.2 The Auto
Reverse (AutoRev)
Functionality
Motor turns in reverse when
Calibration is recommended before each treatment. This is
required to ensure the motor parameters are accurate.
You can easily access "Start Treatment" by clicking on the
Motor START/STOP button once the motor handpiece is
connected to the DENTSPLY ENDO IQ™ application.
Press the multifunction button on the motor handpiece to
move to the next file. Double press to move to the previous
file.
T US XSIQ DFU WEB / Rev.00 (based from T US XSIQ DFU WEB / Rev.05 / 07-2017) / 09-2018 47/88
Real time torque value
(displayed in a circular
bargraph)
activated
Click or swipe to move to next file
or press the multifunction button.
Double press the multifunction
button to move to the previous
file
To calibrate the motor handpiece.
This is required to ensure the motor
parameters are accurate.
Calibration is recommended before
each treatment.
Follow the procedure on the screen
To select a file system or a file sequence.
See 6.7.7 Customize File Sequences
To display a
torque graph
in real time