Consumption Of Water, Dentosept, And The Agent For Suction Hose And Cuspidor Cleaning - Dentsply Sirona Treatment Center Axano Pure Instructions For Use Manual

3 Unit description

3.15 Consumption of water, Dentosept, and the agent for suction hose and cuspidor cleaning

48
3.15 Consumption of water, Dentosept, and the agent
for suction hose and cuspidor cleaning
During treatment and hygiene activities, the treatment center uses
water, Dentosept, the agent for disinfecting the water lines, and a
cleaning agent for chemical suction hose and cuspidor cleaning.
The following are typical values.
Instruments
Sprayvit
Motor and turbine
Ultrasonic handpiece
To ensure a mixing ratio of 100:1 of water to the agent for disinfecting
the water lines (1 liter water, 10 ml Dentosept) in normal operations with
a possible deviation of ±30 % , a ratio of 70:1 is set.
Cuspidor flushing
Water 2 l/min
Tumbler filling
Water 0.1 l
Dentosept 1 ml
Chemical suction hose cleaning
Cleaning agent 2 ml
at a 2% dosage, can be set from 0 to 5%
Chemical cuspidor cleaning
Cleaning agent 2 ml
Purging water lines
Water 100 ml
at 20 s purging time, depending on the handpieces used (2x Sprayvit, 2
drilling handpieces)
Dentosept 1 ml
at a 1% setting
Automatically purge water lines (autopurge function)
Water 2.5 l
at 2 min purging time, consecutively, not parallel, completely loaded
Dentosept 25 ml
at a 1% setting
Sanitizing the water lines
Water 1 l
Dentosept 400 ml
Instructions for Use Treatment Center Axano Pure
Water
in ml/min
150
70
100
D3685.201.02.01.02 2023-12
Dentsply Sirona
Dentosept
in ml/min
2
1
1.4
68 29 514 D3685