Table of Contents
Advertisement
4 Operation
4.5 Dentist element
112
ü The desired file is selected in the advanced endodontics dialog .
➢ Use the – and + keys to set the speed and torque of the contra-
angle handpiece. You can also press and hold the keys to do this.
Ä In the first line, the set value is displayed, in the second line, the
value stored according to the manufacturer's specifications.
An acoustic signal sounds when 75% of the maximum torque is
reached.
In the standard endodontics dialog, the torque and speed stored in the
file database are displayed in the widget.
In the advanced endodontics dialog, the measured torque is displayed
in the widget. The yellow ring shows the current torque, the drag anchor
and numerical display show the maximum torque of the step.
You can set the variant you would like to work with in the setup dialog,
see "User interface [→ 183]".
IMPORTANT
Torque adjustment
The maximum adjustable torque depends on the system motor and
the speed settings.
WARNING
Improperly selected speeds and torque values endanger the patient.
Treatment errors, e.g. breaking of a file, may result from incorrect
settings.
➢ Observe the manufacturer's instructions regarding file systems.
4.5.14.1.7
Switching the torque signal on/off
This can be used to set the beep that sounds whenever approx. 75% of
the set torque value is exceeded.
ü The expanded endodontics dialog is displayed on the Smart Touch.
➢ Touch the beep key.
Ä If the key is marked orange, the torque beep is switched on.
4.5.14.1.8
Changing direction of rotation
The direction of rotation can be changed only when the motor is
stopped.
Instructions for Use Treatment Center Axano Pure
D3685.201.02.01.02 2023-12
Dentsply Sirona
68 29 514 D3685
Advertisement
Table of Contents
