Table of Contents
Advertisement
5 Care, cleaning and maintenance by the practice team
5.3 Instruments and instrument hoses
226
1. Moisten a clean, lint-free cloth with disinfectant.
2. Wipe the motor/adapter with the moist cloth. When doing so, also
wipe any hard-to-reach places.
3. Observe the application time for the disinfectant.
4. Wipe the motor/adapter dry.
Ä The motor/adapter is disinfected and clean.
5. When the motor/adapter is dirty, repeat the cleaning process.
Sterilizing
ü The motor/adapter is cleaned and disinfected.
ü The motor sleeve is unscrewed from the BL ISO F and BL Implant E
motor.
ü If necessary, the adapter, motor and motor sleeve can be packed in
packaging suitable for sterilization and storage, e.g. paper/plastic
composite packaging or a container in accordance with ISO 11607.
➢ Sterilize the adapter, motor and motor sleeve in the steam sterilizer
with saturated water vapor.
Overpressure:
2.04 bar (29.59 psi)
Temperature:
134 °C (274 °F)
Minimum holding
3 min
time:
Steam sterilizers that comply with either EN 13060 Class B (for
example, DAC Premium / DAC Professional) or EN 13060 Class S and
are suitable for the sterilization of motors are approved.
NOTICE
Do not exceed 140 °C (284 °F) even during the drying phase.
Please observe the instructions for use for the sterilizer.
After sterilizing:
1. Remove the adapter, motor and motor sleeve from the steam
sterilizer immediately.
CAUTION
The adapter, motor and motor sleeve are hot. Risk of burns!
NOTICE
Do not try to accelerate the cool-down process by placing the parts in
cold water. This will damage the parts!
2. Store all motors/adapters so that they are protected from
contamination.
3. Sterilize again once the storage period has elapsed.
Sterilize regularly and have the motors serviced after approx. 2 years in
a workshop authorized by Dentsply Sirona.
Instructions for Use Treatment Center Axano Pure
D3685.201.02.01.02 2023-12
Dentsply Sirona
68 29 514 D3685
Advertisement
Table of Contents
