Adjusting The Cleaning Agent Mixture For Chemical Suction Hose Cleaning; Switching Afterblow On/Off; Switching On/Off The Foot Control Function For Intraoral Camera Focus - Dentsply Sirona Intego Operating Instructions Manual

4 Operation
4.15 Configuration of the treatment center (setup)
206
4.15.1.9 Adjusting the cleaning agent mixture for chemical suction hose
cleaning
The chemical suction hose cleaning option is only available for the
Intego Pro.
The suction system can be automatically cleaned by pumping water into
a tank behind the receptacle of the suction hoses and extracting it from
there. A cleaning agent is added to the water if the dental treatment
center is equipped with the chemical suction hose cleaning option. For
more information, see the section "Suction hose cleaning on the
Compact water unit" [→ 260].
It is possible to set how much cleaning agent should be added to the
water for chemical suction hose cleaning. The quantity is dependent on
the cleaning agent used and the type of treatment. Please follow the
manufacturer's instructions for the cleaning agent.
ü The setting focus Cleaning agent mixture flashes.
1. Use the favorite keys 1 and 3 to adjust the cleaning agent mixture
for chemical suction hose cleaning (0 to 5%).
2. Confirm with the 2 / Setup favorite key.
4.15.1.10

Switching afterblow on/off

After a foot control pedal has been released, the cooling spray
remaining in the instrument head or in the tip of the instrument can be
automatically blown out by a brief activation of the chip blower.
ü The setting focus Afterblow flashes.
1. Change the value with the favorite keys 1 or 3.
Ä If there is a 1 in the setting focus, the afterblow is switched on.
2. Confirm with the 2 / Setup favorite key.
4.15.1.11 Switching on/off the foot control function for intraoral camera
focus
If the treatment center is equipped with an autofocus camera and the C
+ electronic foot control, it can be configured in the setup that the
camera image can be focused with the foot control.
● Field 0: The display switches between a still or live image when the
foot pedal is pressed. The knob on the camera can be used to focus
the image.
● Field 1: The camera is focused by pressing the foot pedal. The
display switches between a still or live image only when the foot
pedal is pressed down fully. Focusing via the camera knob still
works.
● Field 2: When the foot pedal is pressed, the camera image is
focused and a still image is automatically taken. Focusing via the
camera knob still works.
ü The setting focus Focusing by foot switch flashes.
1. Change the value with the favorite keys 1 or 3.
2. Confirm with the 2 / Setup favorite key.
Please note that the setting focus Focusing by foot control is displayed
in the Setup program only when the PC is switched on and the
autofocus camera is configured for use on this treatment center. The
Dentsply Sirona
Operating Instructions Intego
64 5 7 4 98 D3543
D3543.201.01.08.02 02.2020