Configuring the EDID setting
Enable or disable the Extended Display Identification Data (EDID) for HDMI 2.0 to play videos from
hardware devices, such as DVD players.
The most commonly used HDMI versions are HDMI 1.4 and 2.0, with differences in bandwidth. The
projector is compatible with both HDMI 1.4 and HDMI 2.0. When the projector is connected to a
hardware device supporting HDMI 1.4 only, disable the EDID for HDMI 2.0 to play the videos
properly.
1. Select Menu > Input Switching & PIP > EDID.
2. Select the HDMI 1, HDMI 2, or HDBaseT item where you want to enable EDID.
3. Set 1.4 or 2.0.
4. To confirm the setting, select ENTER.
Configuring the HDMI output
Set the default HDMI output port.
If multiple projectors are connected to each other in a daisy chain, the HDR signal output is
determined by the first projector and PC handshake.
1. Select Menu > Input Switching & PIP > HDMI Out put.
2. Select HDMI 1 or HDMI 2 as the HDMI output.
3. To confirm the setting, select ENTER.
Inspire Series 4K User Manual
020-002098-01 Rev. 1 (09-2023)
Copyright © 2023 Christie Digital Systems USA Inc. All rights reserved.
If printed, please recycle this document after use.
Configuring input settings
73