Adjusting The Image Settings Automatically; Adjusting The Image With Automatic Focus; Setting The Wall Color Automatically; Balancing The Image Color Automatically - Christie Inspire Series User Manual

Adjusting the image settings automatically

Adjust various image settings automatically, including focus, wall color, and color uniformity.

Adjusting the image with automatic focus

Adjust the image focus automatically with camera kit.
• Auto focus option is disabled and grayed out if the picture mode is set to 3D or High Frame Rate
with the current source or change to no source status.
(The camera does not support 1x color wheel speed.)
• Auto focus option is also disabled and grayed out if the camera is not detected or lens lock option is
enabled.
1. Display an image or test pattern that can be used to analyze image focus.
2. Select Menu > Image Settings > Auto Image Settings > Auto Focus.
3. Select ENTER.

Setting the wall color automatically

Set the wall color automatically so the projector can enhance the color performance customized for
the specific wall.
• Auto wall color option is disabled and grayed out if the picture mode is set to 3D or High Frame
Rate with the current source or change to no source status. (The camera does not support 1x color
wheel speed.)
• Auto wall color option is also disabled and grayed out if the camera is not detected.
1. Select Menu > Image Settings > Auto Image Settings > Auto Wall Color.
2. Select ENTER.

Balancing the image color automatically

Balance the image color automatically with auto color uniformity.
• Image color calibration option is disabled and grayed out if the auto color uniformity option is
disabled/unchecked and the picture mode is set to 3D or High Frame Rate with the current source
or change to no source status. (The camera does not support 1x color wheel speed.)
• Target selection and reset options are disabled and grayed out if the auto color uniformity option is
disabled/unchecked.
1. Select Menu > Image Settings > Auto Image Settings > Auto Color Uniformity.
2. Select appropriate option for image color uniformity:
• Enable—Enables or disables the auto color uniformity function.
• Calibration—Starts adjusting the image color.
• Target Selection—Selects a calibration target.
• Reset—Restores factory settings.
3. Select ENTER.
Inspire Series 4K User Manual
020-002098-01 Rev. 1 (09-2023)
Copyright © 2023 Christie Digital Systems USA Inc. All rights reserved.
If printed, please recycle this document after use.
Adjusting the image settings
47