Christie Inspire Series User Manual page 24

ID Button
4 BRIGHT
5 PIP
PBP
6 SIZE
7 Number keys
8 HELP
9 MENU
10 Arrow keys
11 TEST
12 AUTO
13 OSD
14 KEYSTONE H
15 KEYSTONE V
16 STANDBY
17 CONTR
18 HOT KEY
19 SWAP
20 LAYOUT
21 FOCUS
22 ZOOM
23 PROJ
24 EXIT
25 ENTER
26 INPUT
27 INFO
28 LENS H
29 LENS V
Inspire Series 4K User Manual
020-002098-01 Rev. 1 (09-2023)
Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Description
Adjusts the amount of light in the image.
Turns picture-in-picture/picture-by-picture (PIP/PBP) on or off.
Adjusts the PIP/PBP size.
Enter a number, such as a channel, value, and so on. The on-screen display
(OSD) indicates if a function is not supported.
Displays the instructions for source connection.
Displays the menus.
Adjusts a setting up or down to navigate within a menu.
Displays a test pattern.
Automatically synchronizes the projector to an input source.
Hides or shows OSD menus.
Adjusts the horizontal keystone.
Adjusts the vertical keystone.
Turns the projector off.
Adjusts the difference between dark and light.
Selects your preset key quickly.
Swaps the main and PIP/PBP images.
Adjusts the PIP/PBP layout.
Adjusts the focus to improve image clarity as required.
Adjusts the zoom to achieve a required image size.
Changes the IR remote keypad ID.
• To assign an ID, select PROJ + <1 to 9>.
• To return to the universal IR remote ID, select PROJ + 0.
Returns to previous level or exit menus if at top level.
Selects a highlighted menu item, or changes or accepts a value.
Selects an input for the main or PIP/PBP image.
Displays the projector information.
Adjusts the position of the image horizontally.
Adjusts the position of the image vertically.
Installation and setup
24