Setting The Size Of Second Input Source; Setting The Display Layout With Two Input Sources; Input Sources Layout And Size - Christie Inspire Series User Manual

Setting the size of second input source

Set the size of picture-in-picture (PIP)/picture-by-picture (PBP). See
on page 70 for more details of the layout and size.
1. Select Menu > Input Switching & PIP > Size.
2. Select the appropriate size, small, medium or large, for PIP/PBP input source.
3. To confirm the selection, select ENTER.

Setting the display layout with two input sources

Set the display location for main input source and second input source on the screen. See
sources layout and size
1. Select Menu > Input Switching & PIP > Layout.
2. Select the appropriate layout.
3. To confirm the selection, select ENTER.

Input sources layout and size

A P indicates the primary source region (lighter color) and an asterisk (*) indicates both regions are
the same size.
PIP/PBP layout
PBP, Main Left
PBP, Main Top
PBP, Main Right
PBP, Main Bottom
PIP, Sub Bottom Right
PIP, Sub Bottom Left
Inspire Series 4K User Manual
020-002098-01 Rev. 1 (09-2023)
Copyright © 2023 Christie Digital Systems USA Inc. All rights reserved.
If printed, please recycle this document after use.
on page 70 for more details of the layout and size.
PIP/PBP size
Small Medium
P
P
P
P
P
P
Input sources layout and size
Large
*
P P
*
P
P
*
P P
*
P
P
P P
P P
Configuring input settings
Input
70