Page 1
Installation and Setup Guide 020-001933-01 Inspire Series WUXGA...
Page 2
Christie's control such as maintenance of the product in proper working conditions. Performance specifications are based on information available at the time of printing. Christie makes no warranty of any kind with regard to this material, including, but not limited to, implied warranties of fitness for a particular purpose.
Introduction This manual is intended for Christie qualified installers and trained operators of Inspire Series projection systems. For complete Inspire Series product documentation and technical support, go to www.christiedigital.com. This projector is intended for use in a non-cinema environment. Safety and warning guidelines Read all safety and warning guidelines before installing or operating the projector.
Caution! If not avoided, the following could result in minor or moderate injury. • ELECTRICAL and BURN HAZARD! Use caution when accessing internal components. • Only Christie qualified technicians are authorized to use the tools provided in the toolbox. Laser safety precautions This product is classified as Class 1 Laser Product-Risk Group 2 according to IEC 60825-1:2014 complies with FDA regulations 21 CFR 1040.10 and 1040.11 as a Risk Group 2, LIP (Laser...
Learn about the labels that may be used on the product. Labels on your product may be yellow or black and white. General hazards Hazard warnings also apply to accessories once they are installed in a Christie product that is connected to power. Fire and Shock Hazard To prevent fire or shock hazards, do not expose this product to rain or moisture.
Page 9
Class 1 Laser Product-Risk Group 2 according to Class 1 IEC 60825- 1:2014 and IEC 62471-5:2015. Mount above the heads of children. Christie recommends using a ceiling mount to place the product above eye-level for children. Make sure to adjust the feet of the top projector before stacking to avoid damage to the lower projector.
Contact your dealer Record the information about your projector and keep this information with your records to assist with the servicing of your projector. If you encounter a problem with your Christie projector, contact your dealer. Purchase record...
A web page using Ethernet, or from a PC or device using a wireless USB dongle How the projector works The Inspire Series projector accepts a variety of input signals for a wide range of commercial projection applications. Designed with red and blue solid-state illumination light sources and phosphor technology, the red, green and blue color elements are modulated by one Digital Micromirror Device (DMD) panel responding to incoming data streams of digitized red, green, and blue color information.
Product documentation For installation, setup, and user information, see the product documentation available on the Christie Digital Systems USA Inc. website at www.christiedigital.com. Read all instructions before using or servicing this product. 1. Access the documentation from the Christie website: •...
Christie recommends a 20 A rated wall breaker for the installation. To ensure safe operation, only use the AC power cord provided with the product or recommended by Christie. See...
• Determine the lens throw ratio. For more information detailing the throw ratio for each lens, refer to the Inspire Series Lens Throw Ratios Technical Reference (P/N: 020-103497-XX). • 360 degree free orientation operation When installing the projector in portrait orientation, Christie recommends the built in keypad and power inputs face upwards.
The projector can be inverted and suspended from the ceiling using a specially designed ceiling mount fixture (Christie One Mount 108-506102-XX). For more information, contact your dealer. Warning! If not avoided, the following could result in death or serious injury.
Power consumption 650 W maximum DWU960ST-iS For more information detailing the power requirements, refer to the Inspire Series WUXGA Specification Guide (P/N: 010-108881-01). To ensure safe operation, only use the AC power cord provided with the product or recommended by Christie. Connect the AC power cord to the AC inlet on the projector.
3. Connect the plug of the power cable to the projector. 4. Turn on the device. 5. If the actions described in items 1.-4. did not lead to the desired result, please contact CHRISTIE technical support or an authorized CHRISTIE service center.
• At +100% offset, all of the image appears above the lens center. The following show the vertical and horizontal image offsets for the Inspire Series WUXGA projectors: • Vertical image offset: 0% Lens center •...
Connecting to devices This section covers the information on connecting the Inspire Series projector to a computer and video equipment. Connecting to a computer Learn what cables/connectors can be used to connect to various devices. Laptop Audio output ZOOM FOCUS...
Signal connectivity specifications Identify the signal connectivity specifications for the Inspire Series projector. The list of formats listed below are not exhaustive and other formats may be supported. For more information, contact Christie Technical Support. VGA video formats Identify the video formats for the VGA input.
Page 49
Corporate of ces Christie Digital Systems USA, Inc. Cypress ph: 714 236 8610 Christie Digital Systems Canada Inc. Kitchener ph: 519 744 8005 Mexico ph: +52 55 4744 1790 United States (Arizona) ph: 602 943 5700 United States (New York) ph: 646 779 2014 For the most current technical documentation, visit www.christiedigital.com.