Stacking Application - Christie Inspire 4K Series Installation And Setup Manual

3. Repeat with the remaining feet as needed.

Stacking application

If two projectors are mounted on top of each other without using a frame, adjust the feet of the
upper projector to avoid the interference between the two projectors.
The maximum adjustable range of the rubber foot is 13 mm (0.5 inches).
Inspire Series Installation and Setup Guide
020-002097-01 Rev. 1 (11-2023)
Copyright ©2023 Christie Digital Systems USA Inc. All rights reserved.
If printed, please recycle this document after use.
Tilt-Adjustment Feet
Tilt-Adjustment Ring
Adjust the rubber feet to avoid
interference.
Interference between
two projectors.
Installation and setup
21