Mandatory Billing Codes For Systems Configured With Flex; Stranded Participant Disconnect With Epv - Avaya CS700 Administration And Maintenance

Configuring Conference Scheduler

Mandatory billing codes for systems configured with Flex

The system can prompt the leader to provide a billing code for their conference when entering a
Flex flow conference. To make the billing code mandatory, set the following parameter:
<forceAuxCode>=1 (Set this field to 0 to not require the billing code)
If this field is set to 1, the leader will be disconnected if he fails to enter the billing code after
three attempts.

Stranded Participant Disconnect with EPV

On systems configured with EPV servers, the stranded participant feature can be enabled on a
per conference basis for both Flex flow and default call flow conferences. When stranded
participants remain in a conference for a preconfigured number of minutes, the system plays a
prompt to enter any DTMF key to keep the conference active.
participant settings available through EPV.
Table 35: EPV Stranded Participant Settings
Field
<spctConfThreshold>
<spctConfBlockInput>
<spctConfNumPrompts>
<spctConfPeriodX>
<spctConfPeriodZ>
190 Administration and Maintenance of the S700/780 Audio Conferencing Server
Definition
Number of participants in
conference to disconnect if
no DTMF is entered during
specified timeframe
Whether to block a DTMF
key to keep the conference
alive
Number of times to replay
the termination warning
message
Number of minutes to wait
before playing initial
message to stranded
participant
Interval between warning
prompts
Table 35 shows the stranded
Range Default
0 = 2000 1 participant
0 = disabled
0 = false 0
1= true
0 - 5 System setting
2 -1400 60
1 - 60 System setting