System Management - Status - Avaya Aura Communication Manager 7.1 Application Notes

7.1. System Management – Status
Step 1 - Select System Management and verify that the Status column says Commissioned. If
not, contact your Avaya representative.
Note – Certain Avaya SBCE configuration changes require that the underlying application be
restarted. To do so, click on Restart Application shown below.
Step 2 - Click on View (shown above) to display the System Information screen. The following
shows the relevant IP information highlighted in the shared test environment. The highlighted A1
and B1 IP addresses are the ones relevant to the configuration of the SIP trunk to Verizon. Other IP
addresses assigned to these interfaces and interface B2 on the screen below are used to support
remote workers and are not the focus of these Application Notes. Note that the Management IP
must be on a separate subnet from the IP interfaces designated for SIP traffic.
DDT; Reviewed:
SPOC 10/18/2017
Solution & Interoperability Test Lab Application Notes
©2017 Avaya Inc. All Rights Reserved.
58 of 95
CM71SM71-VzIPCC