Adding Avaya Xt Telepresence In Equinox Management - Avaya XT Telepresence Deployment Manual

Configuring the Avaya XT Telepresence
20. Select Next.
21. Select Done.
Your Avaya XT Telepresence is configured and calibrated. The Calibration application
closes and the standard screensaver image is displayed .
Related links
Configuring the Avaya XT Telepresence

Adding Avaya XT Telepresence in Equinox Management

About this task
If you use regular endpoints to create Avaya XT Telepresence, define them in Avaya Equinox
Management as components of the telepresence system, not as single endpoints. You cannot
directly change an existing single endpoint in Avaya Equinox
endpoint, and vice versa.
If your organization uses an LDAP directory, only the primary endpoint should be defined in the
LDAP directory.
August 2020
Figure 56: Reconnecting the monitor cables.
on page 36
Avaya Video Conferencing XT Telepresence Deployment Guide
Comments on this document? infodev@avaya.com
®
Management into a telepresence
®
76