Table of Contents
Advertisement
Reducing Dust from Cutting Rolls
If the paper tends to generate dust when cut, such as with Backlit Film, you can reduce flying dust by setting
Cut-dust reduction to ON from the operation panel menu, which will coat the leading and trailing edges
of the printed document with ink. As a result, you can reduce problems with the print head. You can set
Cut-dust reduction according to the media type.
A: The ink is coated.
B: Cut Position
Important
• Do not set Cut-dust reduction to ON for paper that wrinkles easily, such as Plain Paper or lightweight
•
paper. If not cut properly, the paper may jam.
• Borderless printing is not available when Cut-dust reduction is set to ON. When performing borderless
•
printing, set Cut-dust reduction to OFF.
Follow these steps to set Cut-dust reduction to ON.
1.
1. Select paper settings display area on Home screen.
2.
2. Select paper source.
326
Advertisement
Table of Contents
Troubleshooting
