Canon imagePROGRAF PRO-6600 Online Manual page 322

4. Select Advanced. 4.
5. 5. Select Cutting mode.
6. 6. Select a setting from the menu.
Automatic cut
Select this to cut the roll paper automatically with the cutter blade.
Eject cut
Select this to move the cutter by operation panel operation and cut paper. With Automatic cut, the
paper drops and may rub against the basket, resulting in damage to the print surface, but you can
cut using this method and supporting the paper so that it does not drop to avoid damage to the
paper. Also, you can prevent paper that has not dried from dropping by visually checking the ink has
dried, and then cutting the paper.
After printing, select Cut paper and cut the roll paper on the cutter blade.
Cutting Roll Paper after Printing
User cut
Select this if the paper cannot be cut on the cutter blade. When Do you want to set to detect the
leading edge of the paper? is displayed, select Detect (recommended).
Cut each page from the roll using scissors.
Cutting Roll Paper after Printing
Important
• • For paper of which the leading edge rubs the print head, set the detection of paper leading
edge to Do not detect and align paper's leading edge with position (A).
Feeding Roll Paper Manually
• • If you set the detection of paper leading edge to Do not detect, a margin of about 4.0 inches
(10 cm) is created at the paper leading edge when printing starts.
322