Canon imagePROGRAF PRO-6600 Online Manual page 581

Cannot Find Printer on Network
Cannot Connect Printer to Network
Cannot Find Printer During Setup
Cannot Find Printer while Using Wi-Fi
Cannot Find Printer while Using Wired LAN
Searching Printer by IP Address or Host Name During Setup
Cannot Print over Network
Cannot Print over TCP/IP Network
Cannot Print over Bonjour networks
Cannot Print Using AirPrint
Network Connection Problems
Network Settings and Common Problems
Cannot Connect to the Printer
Printer Problems
Printer Does Not Turn On
Messages advising to check the maintenance cartridge are not cleared
The Data lamp on the Operation Panel does not light up
If the Printer Makes a Strange Sound
Printed pages are not collected cleanly in the basket
Basket Lurches
Warning Message is Displayed When Performing Color Calibration
Paper is not Fed or Ejected Properly
Remove Jammed Roll Paper
Remove a Jammed Sheet
Roll paper cannot be inserted into the Paper Feed Slot
Cannot load sheets
Roll Paper Is not Fed Automatically
Roll Paper Is not Switched Automatically
Paper Source Does Not Switch When Roll Paper Is Used Up
Roll Paper Remains/Lacks under Quantity Management
The printer ejects blank, unprinted paper
Paper Cutting Problems
Paper is not cut
Paper is not cut straight
Cutter Blade Does Not Work While Cutting Is in Progress
I want to know how to configure roll cutting
I want to configure so that the roll is cut automatically after waiting for the ink to dry
When Trim edge first is set, the trimmed paper is drawn into the roll unit
Paper Setting Problems
Paper widths with high transparency cannot be detected
I want to know the paper types that can be used in this printer
Estimated paper type does not match the loaded paper type
581