Canon imagePROGRAF PRO-6600 Online Manual page 490

1. 1. Load paper.
Loading Rolls in the Printer
Loading Roll Paper in the Roll Unit
Loading Sheets in the Printer
Important
• Always make sure the loaded paper matches the type of paper specified on the printer.
Adjustment cannot be completed correctly unless the loaded paper matches the settings.
2. 2. Select Maintenance on HOME screen.
3. 3. Select Print Head Alignment.
4. 4. Select Auto (standard) or Auto (advanced).
A confirmation message appears.
5. Select Yes. 5.
The paper source setting screen appears.
6. Select Roll paper 1, Roll paper 2 or Manual. 6.
A test pattern is printed for adjustment.
Note
• If you are printing on cut paper smaller than A2 size, a confirmation message prompting you to
continue printing appears after the first sheet is printed. Select Yes and follow the instructions on
the touch screen.
490