Canon imagePROGRAF PRO-6600 Online Manual page 592

• Click Get Information to reflect the paper information set in the printer to the printer driver. •
Does the paper loaded on the printer match the media type selected on the
Check 3
touch screen?
Set the correct media type on the touch screen.
Changing the Type of Paper
Has the paper feed rate been calibrated properly?
Check 4
Adjust the feed amount.
Automatically Adjusting Different Colored Horizontal Streaks
Adjusting Line Length
When printing photos and posters, are the Print Target settings set correctly?
Check 5
In the printer driver, change the setting to Photo (Color) or Poster in Print Target.
Printing By Setting Print Purpose
Low Print Quality setting causing lines in the printing
Check 6
Follow the steps below to set Print Quality to the highest quality setting, and then print.
• Windows •
Change the Print Quality settings in the printer driver Advanced Settings.
Changing the Print Quality and Correcting Image Data (Windows)
• • macOS
Change the Print Quality in the printer driver Quality & Media settings.
Changing the Print Quality and Correcting Image Data
Is Set priority in the touch screen menu set to Prioritize length accuracy?
Check 7
Setting Set priority to Prioritize print quality in Paper feed adjustment may improve the print quality.
Maintenance
Check if the Print head is in the right position
Check 8
Adjust the Print head position.
Automatic Adjustment to Straighten Lines and Align Colors
Print job may have been interrupted while receiving, and therefore not printed
Check 9
at a fast frame rate
Exit other applications and cancel other print jobs.
Make sure that lines are not printed around 100 mm from the paper edges.
Check 10
If the printer is on standby or if you leave paper as it is for approximately over 30 minutes, paper may be curled
or wrinkled.
(macOS)
592