Cutting Roll Paper - Canon imagePROGRAF PRO-6600 Online Manual

Cutting Roll Paper

After feeding the roll paper, you can cut the roll paper.
1. 1. Select the paper setting display area on Home screen.
2. 2. Select paper source.
3. 3. Select Feed/cut.
4. 4. Tap or touch Advance and Rewind to move roll paper forward or back.
Note
• • Tapping Advance or Rewind moves the roll paper approximately 0.04 inch (1 mm).
Touching Advance or Rewind moves the roll paper until you release the key. If "Cannot advance
the paper any further." appears on the operation panel, release the key.
5. 5. Select Cut paper when you have determined position of roll paper.
6. 6. Check the contents of the message and select Yes.
After the roll paper is cut, it is rewound automatically.
295