Canon imagePROGRAF PRO-6600 Online Manual page 383

Hide thumbs Also See for imagePROGRAF PRO-6600:

Table of Contents

Select Enable to wirelessly connect via wireless router.

◦ Wi-Fi setup

Select how to setup Wi-Fi.

▪ Easy wireless connect

Select if you specify the settings of the access point information to the printer directly from a

device (e.g. smartphone, or tablet) without operating the wireless router. Follow the on-screen

instructions of the connecting device for the setup procedure.

▪ Manual connect

Select when you perform settings for Wi-Fi manually using the operation panel of the printer.

▪ WPS (Push button method)

Select when you perform settings for Wi-Fi using a wireless router supporting a Wi-Fi Protected

Setup (WPS) push button method. Follow the on-screen instructions during setup.

▪ Other connection types

▪ WPS (PIN code method)

Select when you perform settings for Wi-Fi using a wireless router supporting a Wi-Fi

Protected Setup (WPS) PIN code method. Follow the on-screen instructions during setup.

• Select Advanced to make detailed LAN settings.

For the items that can be set, see the following.

• Wireless Direct

The following setting information on the Wireless Direct connection is displayed. (Some items are not

displayed depending on printer settings.)

Network name (SSID)

Wi-Fi security

No. of printers connected now

IPv4 address

IPv4 subnet mask

IPv4 default gateway

IPv6 link-local address

Enable / Disable

DIRECT-XXXX-PRO-NNNN*1

WPA2-PSK (AES)

XXX. XXX. XXX. XXX

XXXX: XXXX: XXXX: XXXX:

XXXX: XXXX: XXXX: XXXX

XX:XX:XX:XX:XX:XX

Troubleshooting