Canon imagePROGRAF PRO-6600 Online Manual page 105

3. 3. Align right edge of roll paper to right edge of paper core while pulling on roll paper evenly, and
secure with tape.
4. 4. While making sure that roll paper is flat, secure left edge of roll paper to paper core with tape.
◦ Outward Winding ◦
◦ ◦ Inward Winding
Important
• • Secure the left and right edges of the roll paper with tape within 2.0 inches (50 mm) of the
edges so that neither end of the roll paper lift up.
• • When rewinding heavyweight paper, use strong adhesive tape to fasten it. Otherwise, a
rewinding problem may result.
• • If you use a paper core narrower than the paper to be wound, adjust the position of the
holder stopper, so that there is a gap between the holder stopper and the paper.
5. 5. Make sure the leading edge of the roll paper is not lifting up from the paper core, and if there
are places lifting up, tape in additional places so that the paper does not lift up.
6. 6. Push roll holder downward and check that roll holder is not lifting up.
◦ ◦ Outward Winding
105