Table of Contents
Advertisement
Enlarging Copy with imageRUNNER ADVANCE
Copy scanned with imageRUNNER ADVANCE can be sent to the printer via FTP.
Enable FTP from Remote UI.
1. Start up Remote UI.
1.
Start up Remote UI
2. Select System info and LAN settings.
2.
3.
3. Select LAN settings.
4.
4. Select Advanced setup.
5.
5. Confirm the message and select Yes.
6.
6. Select FTP settings.
7.
7. Select Enable.
8.
8. Select Use authentication check box and Set/change password check box, and then
enter a user name and password.
The user name and password you enter in this step are used for FTP authentication. Enter the same
value for FTP settings of imageRUNNER ADVANCE.
9.
9. Select OK.
Please wait momentarily appears and returns to the startup screen.
10.
10. Close web browser.
Perform enlarge settings on the operation panel.
1. Select
1.
2. Select Print settings.
2.
3.
3. Select Direct print settings from FTP.
4. Select the number to set.
4.
Printer settings on HOME screen.
191
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the imagePROGRAF PRO-6600 and is the answer not in the manual?
Questions and answers