Table of Contents
Advertisement
Switching Roll Unit Modes
Before using the roll unit, follow these steps to select the mode you want to use.
Important
•
• After switching the roll unit function, you must use a separate computer to apply the roll unit settings to
the printer driver.
Reflect Roll Unit Settings in the Printer Driver (Windows)
Reflect Roll Unit Settings in the Printer Driver
•
• If you change the roll unit from a take-up device to a feed device, first cut the paper that has been taken
up.
Using as take-up device
1.
1. Select the paper setting display area on Home screen.
2.
2. Select the Roll paper 2 area.
3.
3. Select Roll unit use settings.
4.
4. Check the contents of the message and select ON.
5.
5. Select paper cutting settings when using take-up mode.
(macOS)
94
Advertisement
Table of Contents
Troubleshooting
