Cleaning Inside The Top Cover - Canon imagePROGRAF PRO-6600 Online Manual

Hide thumbs Also See for imagePROGRAF PRO-6600:

Table of Contents

Cleaning Inside the Top Cover

Clean inside the top cover about once a month to maintain better printing quality and help prevent problems.

Also clean inside the top cover in the following situations to ensure optimal operation.

• If the printed surface or the underside of paper is dirty after printing

• After you have used up a roll

• After borderless printing

• After printing on small paper

• After printing on paper that generates a lot of cutting debris

• If you have replaced the roll

• After printing on paper that generates a lot of paper dust

• After printing on adhesive paper

• If the platen inside the top cover becomes dirty, it may soil the underside of paper. We recommend

cleaning the platen after borderless printing or printing on small paper.

• If the output guide is dirty, it may soil the edge of the paper when the paper is cut. We recommend

cleaning the output guide even if it does not appear dirty, because it may actually be covered with

• Printing on adhesive paper may leave adhesive on the platen, paper retainer, or other parts. To prevent

paper jams, we recommend cleaning inside the top cover after printing.

• Cleaning may not be performed if there is paper in the cleaning area. Remove the paper.

Maintenance on HOME screen.

2. Select Platen cleaning.

3. Check the contents of the message and select Yes.

The carriage moves and after it stops moving, instructions appear on the touch screen.

4. Open top cover.

5. If paper dust has accumulated in vacuum holes (A) on platen or in ink grooves (B), use

cleaning brush (C), provided with printer, to wipe it away.